• (PDF) A Study on Effective Replacement of Fine

    Use of copper slag in the concrete industry as a replacement for cement and/or fine aggregates can has the benefits of reducing the costs of disposal and helps protecting the environment. 3) Copper slag: Copper slag is a by-product material produced from the process of manufacturing copper.(PDF) Partial Replacement of Copper Slag as Fine ,The results are presented above. The optimum value which provided the best performance was at 50% addition of copper slag for compressive strength. The concrete was prepared for the M20 grade concrete with partial replacement of fine aggregate by copper slag with various percentages of (0%, 5%, 10%, 20%, 30%, 40% and 50%).

  • Experimental Study of Partial Replacement of Fine

    Experimental Study of Partial Replacement of Fine Aggregate and Cement with Copper Slag and Fly . Ash . Miss. Amruta R. Shelke1, Prof. M. P. Bastwadkar2 1 PG Research Scholar, 2 Assistant Professor, Civil Engineering Department JSPM’s ICOER, Wagholi, Pune, SPPU University.. Abstract: Experimental work carried out by partial replacing of fine aggregate and cement with copper slag and fly ash(PDF) Partial Replacement of Copper Slag as Fine ,The effect of ground copper slag (GCS) on the strength and fracture of cement-based materials is studied. Up to 15% by mass of ground copper slag was used as a portland cement replacement.

  • The behaviour of Concrete by Partial Replacement of Fine

    2017-10-9 · replacement of Cement and fine aggregate with Copper Slag considered. Experimental study is conducted to evaluate the workability and strength characteristics of hardened concrete, by partially replacing the cement and sand by various percentages of copper EXPERIMENTAL STUDY OF CONCRETE WITH COPPER ,2019-3-6 · EXPERIMENTAL STUDY OF CONCRETE WITH COPPER SLAG FOR PARTIAL REPLACEMENT OF FINE AGGREGATE S. GOVINDHAN¹, P. PAPITHA² ¹Head of the Department, Department of Civil Engineering, Sembodai R.V Engineering College, Sembodai, Nagappattinam, Tamilnadu-614820

  • Experimental Study on Glass Fibre Reinforced Concrete

    2019-7-1 · glass fibre reinforced concrete beam with copper slag as a partial replacement of fine aggregate. The parameters of the study included by replacing the fine aggregate by copper slag with 50%, 60%, 70% and by varying the volume fraction of glass fibre from 0 to 0.1% with an increment of 0.025%. The grade of concrete is M35.Partial Replacement of Copper Slag as Fine Aggregate,2019-1-24 · concrete with partial replacement of fine aggregate by copper slag with various percentages of 0%, 10%, 15% and 20%. The specimens were casted for 7days, 14 days and 28 days then tested. The results are presented above. V. REFERENCES [1] Al-Jabri, K. and Makoto Hisada. “Copper slag as sand

  • A Study on Effective Replacement of Fine Aggregate

    2015-5-1 · 2) Fine aggregate: Locally available river sand conforming to Grading zone II of IS: 383 –1970. 3) Copper slag: Copper slag is a by-product material produced from the process of manufacturing copper.EXPERIMANTAL INVESTIGATION OF PARTIAL ,2020-4-20 · Ganapathi Raj S “Partial Replacement of Copper Slag as Fine Aggregate” (2017) [9] R. Elamaran, K. Srinivasan, S. Vimala “Use of Copper Slag for Partial Replacement to Fine Aggregate in Concrete” (2019) [10] Pradeep Sharma, Mukesh Kumar “AN EXPERIMENTAL INVESTIGATION ON PARTIAL REPLACEMENT OF CEMENT WITH EGG SHELL POWDER AND FINE

  • REPLACEMENT OF COPPER SLAG WITH FINE AGGREGATE

    2020-3-29 · REPLACEMENT OF COPPER SLAG WITH FINE AGGREGATE BHOSALE MAHESH 1BHIMARAO,SATHE AKASH SHRIKANT2, Dr.Santosh K Patil3 1Assistant Professor Department of Civil Engineering, KJ College of Engineering, Maharashtra, India 2Lecturer, Department of Civil Engineering, All India Shri Shivaji Memorial Society, Maharashtra, India(PDF) A Study on Effective Replacement of Fine ,Use of copper slag in the concrete industry as a replacement for cement and/or fine aggregates can has the benefits of reducing the costs of disposal and helps protecting the environment. 3) Copper slag: Copper slag is a by-product material produced from the process of manufacturing copper.

  • Use of copper slag as a replacement for fine aggregate in

    2014-5-17 · replacement of fine aggregate by copper slag does not have a significant effect on the load carrying capacity of the columns. Increasing the copper slag beyond this ratio accelerates the buckling, which leads to premature (before steel yields) failure load and a larger deflection.EXPERIMENTAL STUDY OF CONCRETE WITH COPPER ,2019-3-6 · EXPERIMENTAL STUDY OF CONCRETE WITH COPPER SLAG FOR PARTIAL REPLACEMENT OF FINE AGGREGATE S. GOVINDHAN¹, P. PAPITHA² ¹Head of the Department, Department of Civil Engineering, Sembodai R.V Engineering College, Sembodai, Nagappattinam, Tamilnadu-614820

  • Partial Replacement of Copper Slag as Fine Aggregate

    2019-1-24 · concrete with partial replacement of fine aggregate by copper slag with various percentages of 0%, 10%, 15% and 20%. The specimens were casted for 7days, 14 days and 28 days then tested. The results are presented above. V. REFERENCES [1] Al-Jabri, K. and Makoto Hisada. “Copper slag as sandThe behaviour of Concrete by Partial Replacement of Fine,2017-10-9 · B. Partial replacement of Cement with Copper slag results 1) Slump Cone Test Fig. 7: Variation of slump a) Description of Result From Fig7, The variation of slump for the partial replacement of Fine aggregate with copper slag increased in the order

  • EXPERIMENTAL STUDY ON CONCRETE BY PARTIAL

    2017-5-2 · replacement of fine aggregate by copper slag and flexural strength increased by 14 % for 40 % replacement. Many researchers have investigated worldwide on the possible use of copper slag as a concrete aggregate. Some of the important and published works are COPPER SLAG IN CONCRETE AS REPLACEMENT MATERIAL,2020-4-10 · copper slag as a replacement for fine aggregate at constant workability and studied the effect of super plasticizer addition on the properties of High Strength Concrete made with copper slag. They observed that the water demand reduced by about 22% for 100% copper slag replacement. The

  • Seminar on replacement of fine aggregate

    2017-8-23 · There are a number of industrial wastes used as fully or partial replacement of coarse aggregate or fine aggregate. Some of these industrial wastes like waste foundry sand, steel slag, copper slag, imperial smelting furnace slag (ISF slag), blast furnace slag, coal bottom ash, ferrochrome slag, palm oil clinker etc are used.[PDF] The Behaviour of Concrete by Partial ,The replacement of natural resources in the manufacture of cement and sand is the present issue in the present construction scenario. Copper slag and Ground Granulated Blast furnace Slag (GGBS) are industrial by-product materials produced from the process of manufacturing copper and iron. Use of Copper slag and GGBS does not only reduce the cost of construction but also helps to reduce the

  • The behaviour of Concrete by Partial Replacement of Fine

    2017-10-9 · B. Partial replacement of Cement with Copper slag results 1) Slump Cone Test Fig. 7: Variation of slump a) Description of Result From Fig7, The variation of slump for the partial replacement of Fine aggregate with copper slag increased in the order EXPERIMENTAL STUDY O N CONCRETE (M30) BY PARTIAL,2017-2-4 · replacement of 40%fine aggregate with CS. Key w ords: Fine aggregate, copper slag, compressive strength, tensile strength, Flexure strength Cite this Article: Ch. Sai Bhavagna and G. Lalitha,Experimental Study on Concrete (M30) by Partial Replacement of Fine Aggregate with Copper Slag . International Journal of Civil

  • C i & E n v ironmental Journal of Civil & Environmental

    2020-2-19 · in concrete as replacement material of fine aggregate. For this study, M40 grade of concrete is used and the tests are conducted for various replacement of fine aggregate using copper slag as 0%, 20%, 40%, 60%, 80% and 100% in concrete. The obtained results are compared with those of control concrete made with fine aggregate [10].[PDF] Effects of Copper Slag as a Replacement for Fine,Use of copper slag (CS) as a replacement for fine aggregate (FA) in RC slender columns was experimentally investigated in this study. Twenty columns measuring 150 mm x150 mm x 2500 mm were tested for monotonic axial compression load until failure. The concrete mixture included ordinary Portland cement (OPC) cement, fine aggregate, 10 mm coarse aggregate, and CS.

  • Copper Slag Partially Replaces Fine Aggregate in M 25

    2020-4-2 · partial alternative for fine aggregate where its world annual generation is about 33 million tonnes. The project look through the use of copper slag as partial replacement to M sand and natural sand for the designed M 25 grade mix concrete. compressive strengthEXPERIMENTAL STUDY ON CONCRETE BY PARTIAL ,2017-5-2 · replacement of fine aggregate by copper slag and flexural strength increased by 14 % for 40 % replacement. Many researchers have investigated worldwide on the possible use of copper slag as a concrete aggregate. Some of the important and published works are

  • Influence of Copper Slag in Concrete as Partial

    2017-5-8 · copper slag by replacing natural fine aggregate at different percentage like (0%, 20%, 40%, 60%, 80%, and 100%). B. Objective of the Investigation 1) The use of copper slag in the concrete as a replacement for fine aggregate, reduces the costs of disposal, lowers the cost of the concrete and also helps in protecting the environment.Study on the partial replacement of fine aggregate using,2001-4-7 · The fine aggregate used for the study is manufactured sand. The coarse aggregates were of 12mm and 20mm size. Tests were carried out on fine aggregate and coarse aggregate in-order to obtain their physical properties. Table 1 Physical properties of fine aggregate Property Fine aggregate Coarse aggregate Test method M sand IFS 12 mm 20 mm

  • Utilization of Copper Slag in M-Sand as Partial

    2017-12-30 · The cost analysis indicates that percent of fine aggregate reduction decrease the cost of concrete, but at the same time the strength also increases. The mix prepared with 30% replacement of fine aggregate(M-sand) by copper slag is most 0 10 20 30 Seminar on replacement of fine aggregate,2017-8-23 · There are a number of industrial wastes used as fully or partial replacement of coarse aggregate or fine aggregate. Some of these industrial wastes like waste foundry sand, steel slag, copper slag, imperial smelting furnace slag (ISF slag), blast furnace slag, coal bottom ash, ferrochrome slag, palm oil clinker etc are used.